10-12kV · IEC · manufactured by Shanghai Jingmin Electric, China.
A drop-out fuse cutout protects distribution transformers and branch lines: the fuse element melts on a fault and the carrier drops visibly, giving a clear isolation point. It is the cheapest protection for small ratings and is still standard on overhead networks.
Porcelain or polymer housings, copper or silver fuse elements, and mounting brackets for pole or cross-arm installation.
| Parameter | Value |
|---|---|
| Model | (H)RW11 |
| Product type | Drop-out Fuse Cutout |
| Rated voltage | 10-12kV |
| Standard | IEC |
| Key features | standardised design and low cost |
| Typical application | distribution transformer protection |
| Customisation | Rated current, voltage class, IP rating, colour and drawing set to project requirements |
| Documentation | GA drawing, circuit diagram, routine test report; IEC type test report on request |
| Packing | Export wooden case or steel frame, sea-worthy, lifting points marked |
| Origin | Manufactured in Zhejiang, China · Shanghai Jingmin Electric Co., Ltd. |
Typical projects where this model is specified.
Typical distribution transformer protection installations where this drop-out fuse cutout is specified, sized to the local short-circuit level and ambient conditions.
Send your single-line diagram, rated current and site conditions — we confirm the model, issue a drawing for approval and quote FOB Shanghai or CIF your port.
Other Drop-out Fuses in the same family.
Tell us the quantity, rated voltage and delivery port. We reply with a technical confirmation and price within 24 hours.
